350 psi working pressure. Cap @ 80% (Lbs.) NPT Plug- YES, Float Switch- NO, Water Capacity- 239 Pounds, Tare Weight- 85 Pounds Primary UOM: EA Order Multiple: 1 Save to Favorites 50 lb recovery tank Fill with no more than 32lbs of R410a or 39 lbs of R22 total tank weight will be about 60lbs for R410a and 67lbs for R22. Recovery Weight Model (Lbs.) Cylinder volume = 47.17 pounds 62.5 pounds/cubic foot = 0.75cubic feet. Maximum cylinder weight = (0.75 cubic feet x 67. pounds/cubic foot x 0.80) + 24 pounds = 64.48 pounds. A technician should not continue to fill this recovery cylinder once its weight has exceeded 64.48 pounds. Water capacity (WC) is the total weight of liquid water that fills the tank to 100% capacity. Caution: for safety reasons it is very important to fill all cylinders by weight in accordance with the cylinder suppliers instructions and ARI guidelines. Use With NC23 28 23.8 23 One 1 Port 43 R13, R23, R503 LP13, VR13 NC80 106 89 84 One 1 Port 113 R13, R23, R503 LP13, VR13 Nominal Cap Water Cap Max. The water capacity of a recovery cylinder normally is stamped on the outside of the cylinder. For example, if a recovery cylinder has a water capacity of 47.17 pounds, then its internal volume will be 0.75 cubic feet (47.17 pounds 62.5 pounds/cubic foot = 0.75 cubic feet). 2. Low Pressure Containers Ril, Ri13, R123 Drum Size 100 lb. As you can see in the image above, the tare weight is 16.6 lbs, and the water capacity is 47.6 lbs. This allows for easy, safe recovery of the refrigerant and automatic shut-off of when the refrigerant cylinder is 80% full. Nominal Cap Water Cap Max. Again, overfilling a recovering cylinder can lead to very serious injury. DOT-APPROVED RECOVERY CYLINDER View Details; 12.5 LITER RECOVERY CYLINDERS View Details; 27.2 LITER RECOVERY CYLINDERS View Details; 30 LB. Fill Capacity assuming the 50 lb recovery cylinder has a water weight capacity of 47.6 lbs. Reusable and conforms to DOT-4BA-400 specifications and ARI guidelines. DOT requires cylinders to be retested every five years. upc 700376680102. Maximum Recovery Capacity 80% (Lbs. Steel Cylinders 30 lb 123 lb Water Capacity (lb/kg) 30/13.6 123/55.8 Tare Weight (lb/kg) 20.2/9.2 54.7/24.8 Height (in/mm) 20.2/512 53.9/1370 Diameter (in/mm) 9.2/233 10.0/254 Collar Height (in/mm) 4.7/119 N/A 15.6: Height (In.) Valves (Lbs.) Valves (Lbs.) 17 15/16 in: Width (In.) Maximum cylinder weight = (0.75 cubic feet x 67. pounds/cubic foot x 0.80) + 24 pounds = 64.48 pounds. 100 LB. NPT Plug- YES, Float Switch- NO, Water Capacity- 47.7 Pounds, Tare Weight- 28 Pounds. chlorine cylinders. Publication Date: 12/03/2007 Recent Articles by Joe Marchese 9 1/16 in: Collar: 7 1/2: Base: 8 1/16: Capacity (kg/Lb.) The Recovery Vessel is designed to totally encapsulate a leaking chlorine cylinder by inserting and securing the entire cylinder within the For example, in the 4BA400 tanks which have a 800 psi test pressure, the relief valve opens at between 600 psi and 800 psi. 30 lb recovery tank Fill with no more than 17lbs of R410a or 21 lbs of R22 total tank weight will be about 35lbs for R410a and 39lbs for R22. DOT-APPROVED RECOVERY CYLINDERS View Details; 50 LB. 30 lb., 50 lb., 100 lb., 250 lb. sku MEDC-26941. Recovery Weight Model (Lbs.) Compare at: $1,883.38. Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB Brand : USA Lab $105.00 - $325.00 or 4 interest-free payments of $26.25 - $81.25 with Size: * 30LB 50LB 100LB Quantity: Condition: New Shipping: Calculated at Checkout Brand: Mastercool Connection: 1/4" JIC Description Other Details Powder coated cylinder for high gloss, durable finish, 50 lbs. and 50 lb. HVAC Refrigerant Recovery Cylinder 50 lb Reusable Tank Condition: New DOT-4BA400 Transportation Certified CFC, HCFC , HFC Refrigerants: R-22 | R410a | R-134a and others Cylinders meet ARI Guidelines. (Lbs.) Store Inventory. Recovery cylinders that are returned through the Chemours Reclaim Program will use standard tare weights as follows: Cylinder Size (lb) Pressure Rating (psi) Tare Weight (lb)* Details 30 All 16 Standard tare weight is used for all 30 lb cylinders. CURRENTLY IN STOCK!!! A technician should not continue to fill this recovery cylinder once its weight has exceeded 64.48 pounds. >123 LB / 55.6L: Service Pressure: 800 PSI: For Use With: Refrigerant: Package Quantity: 1: Warranty: 1 Year Warranty Repair: Material: Metal: Manufacturers Part Number: NC100: Color Family: Gray: Valves: One 2 Port: Width: 10 in: Connection Size: 3/4 MPT: Length: 10 in: Max Recovery Cap @ 80%: 100 lbs: Nominal Weight Capacity: 125 lbs: Weight Capacity: 125 lbs: refrigerant cylinder features 16 diameter lid and collar designed to include 3 larger FOR: US DOT 3A480 & 3AA480 100/150 lb. The Float uses a three pin Brad Harrison connector; recovery equipment must be equipped with a refrigerant float safety circuit and cable to utilize this product. Price: $392.21. 40 All 18 Standard tare weight is used for all 40 lb cylinders. Pre-charged cylinder provides a clean, dry interior; Storage and transport of recovered refrigerant gases; AUS Approved and TC Canadian Approved; SPECIFICATIONS: Size (w x h): 11.25 x 31.81 Tare Weight: 50.5 lb; Standard Specification: DOT-4BW400; Nominal Water Capacity: >92.5 lb / 41.9 L; Service Pressure: 400 PSI / 2.7 MPa Maximum refrigerant capacity is limited to 80% of the water capacity of the cylinder in lb. 54-RC100 Refrigerant Recovery Tank. Galvanized steel cap available for 123 lb cylinder. Shipping Weight 100 lbs. 100 Lb Recovery Tank - 18 images - commercial tanks fuel storage, used 1200 gallon stainless steel jacketed storage tank, tank relocation tank service llc, 570 045 halotron recharge recovery pump, 3/4" NPT Port Price $145.95 Other cylinder sizes and ergonomic handle styles available. Refrigerant Recovery Cylinder: Recovery Tank Size: 30 lb: Weight Empty (Lb.) Refrigerant Recovery Cylinder DOT 4BA400 Cylinder NEW WE BUY REFRIGERANTS Nominal Tare Weight: 28 lbs. 200 lbs. ): 100 Note 1: Available in 400 Lb. Scales only measure the total weight, so you must remember to include tare weight when determining your maximum recovery fill. No reviews. 100 lb. DOT- APPROVED RECOVERY CYLINDER MSC. Consider a standard 100-lb propane tank. Refrigerant Recovery Cylinder, 30 lb Recovery Tank 600 PSI. tank equipped with liquid/vapour Y valve. Y-valve for liquid/vapor. Liquid and vapor valves (Y valve or separate valve configurations) are installed in all cylinders. (Lbs.) 1 Answer to Determine the weight of a recovery cylinder when safely filled with the following specifications: tare weight of 20 lb; water capacity of 30 lb; refrigerant specific gravity of 1.1. and 1000 lb. NC30 30 26.2 400 24 One 2 Port 16 cylinders and the collar design allows handling ease 1000 lb. Float switches have 3-pin brad harrison connectors. Now, for the details: 200 lb. Brand: Mastercool. 3/4 NPT opening accepts 80% fill float switch shut-off device. HFS R Manchester Recovery Refrigerant Solvent Tank Cylinder 100 Lb Powder Coated Made In USA (100 LB): Automotive. The Chlorine Institute Recovery Vessel was developed by the Chlorine Institute to contain leaks that may occur in 100 & 150 lb. Weight: 0.00 LBS. Capacity: 100 lb: Color: Yellow/Gray: Dimensions: 11.25" W x 31.81" H: Nominal Water Capacity: >92.5 lb / 41.9 L: Relief Valve Pressure: 600 psi / 4.1 MPa: Service Pressure: 400 psi / 2.7 MPa: Standard Specification: DOT-4BW400: Tank Test Pressure: 800 psi / 5.5 MPa: Weight: 100 lb refrigerant cylinders include an extra NPt opening (plugged) for future installation of an automatic stop-fill liquid level switch refrigerant/recovery 30 lb. PSI Cap @ 80% (Lbs.) 02255. DOT requires cylinders to be retested every five years. Some recovery equipment uses weight scales to cut off refrigerant fill at 80% of capacity. Be sure cylinder tare weight is correct for this type of equipment. Wall Mounted Heat Pumps & Units; Multizone Air Conditioning; Central Air Conditioning; Commercial Air Conditionning; Ceiling, Window & Through the Wall Air Conditionings Description. pressure Number of Valves: One 2 Port Water Capacity (Lbs. DOT-APPROVED RECOVERY CYLINDERS View Details; 6 LITER RECOVERY CYLINDERS View Details; ENVIRO TANK Painted yellow/gray per ARI guidelines. Buy HFS R Manchester Recovery Refrigerant Solvent Tank Cylinder 100 Lb Powder Coated Made In USA (100 LB): Air Conditioning Line Repair Tools - FREE DELIVERY possible on eligible purchases. Tank meets ARI guidelines and government specifications for CFC, HCFC & HFC recovered refrigerants, including R11, R12, R22, R500, R502, R134a and R414b. This item 100 LBS Refrigerant Recovery. For use with 100 Pound Cylinders. Thats the highest number you should see on your scale. According to our example, our R-410a recovery tanks total weight should not exceed 49.97 lbs on a scale. The lower value is the refrigerant weight. Mastercool MSC-68010 100 LB. Collar design for ease of handling. 50 lbs. Item Number: 02255 Item Description: 250 Pound, Dot Class- 4BA400, 3/4in. Chlorine Cylinders. Compare with similar items. Do not overfill cylinders. 650 lbs.