Worn Out Kitchen Worktops and Cupboards? The kind of doors you have will dictate your hinge choice. Being able to achieve that look will very much depend on having the right wood, but you could have a look at the Osmo Polyx Oil in a glossy finish. Do you have any ideas what I can do to get rid of the smell? Thanks . I have mahogany worktops that have faded in parts (possibly due to cleaning materials/bleach) I want to renovate all of the cabinets at my kitchen and I dont know what surface to choose. Its quite possible that you will be able to apply over the Osmo Oil, now, the manufacturers will not recommend this and so there are not guarantees. Before you remove the doors and drawers, mark their location with a tape label and place it on the back. Any ideas how I should clean the marks off please? Or you can email me direct at wood@finishes.direct, Hi, we have a beech wood kitchen work surface and would like to stain it a graphite colour. Posted on Published: January 31, 2021- Last updated: May 10, 2021. Should Your Front Door Be The Same Color Inside And Out? Try using it to scrub away the grease that can build up in those hard-to-reach areas and in the corners. If youre worried about the varnish, wipe over with a clean cloth and clean hot water to rinse. If it is oil on the surface of your worktops you should be able to remove it by wiping down with White Spirit. They are too dark. Test areas are important. If you would like to forward some images to wood@finishes.direct and I will be happy to take a look. For blackened holes like the one shown, use a rotary tool with a pointed cutter bit to dig out the black areas before filling. We wiped down first with white spirits to clean, then applied Sadolin extra durable wood stain but it would not dry out. I would recommend having a look at the Manns Premier Top Oil. I would recommend removing all of it as you are unaware of what the treatment is and then you can start again with the right product applied in the right way. For instance, you can stop after simply cleaning and refinishing the doors. I do a lot of cooking and have pine work tops. For this makeover, I removed and replaced all the hinges and handles, cleaned and refinished the doors, and cut and painted grooves in the faces. Red and orange tones can help to add a bit of depth to the room, as well as open it up a bit if there is a lot of natural lighting. Care must also be taken when applying varnish not to over work as this can result in pulling the paint. The new doors are 120 mm short but I now have managed to secure 2 oven infill pieces of the correct width and height the only problem is the colour, the kitchen is light oak where as the infill pieces are limed oak. If you have already applied the oil, it is not possible to use the Wood Protector unless you remove all the oil first. Once you have the wood as you would like then you can re seal with a varnish or oil depending on what suits you needs. While I was away for a few days, a friend sanded them down and varnished them as a surprise! When applying the finish, use long vertical strokes to ensure that the finish dries evenly. Are you able to send me some photos showing the whole table and the affected areas and I will be happy to take a look. You could have a look at the Fiddes Hard Wax Oil Natural. from the doors edge. Am thinking a Fiddes hard wax oil tint perhaps? When sanding the cabinets, be sure to go in the same direction as the grain. And by far the most expensive part of this project is replacing or refacing the cabinetsso whats the solution? If you have a read up of the blog and feel free to get back to me if you need any further advice. Always try a test area first. Feel free to comment. Install door bumpers inside the lip on the opposite side of the hinges so the door will rest evenly on the cabinet frame. I would not spray it on and leave it to soak. Hinge screws break easily. I love spending time there with my family. Self-closing hinges are convenient and less obtrusive. Buy Old English furniture polish on Amazon. Aw good intentions from your friend but sound like there are a few issues there. When deciding what colors to coordinate with your oak cabinets, it's best to determine whether you want the cabinets to stand out or to evenly blend with the rest of the decor. You may want to use a concealed, cup-style hinge that mounts to the cabinets interior. Thank you for your enquiry. Fill the old hardware holes in the doors with oil- or water-based wood filler, drawers and cabinet frames after the final coat of finish is dry. kitchen surfacesare some of the most vulnerable as well as the most beautiful. Need some help with your wooden kitchen worktop surfaces? Over their lifetime kitchen units come in for a proper bashing, and wood We can then make some recommendations for you to consider for your project. For sink areas we do often recommend the Osmo Wood Protector. Thank you for your enquiry. You can lightly abrade the rough area, try with a Woodleys Finishing Pad first to see if this brings down the roughness of the wood, it could be an area of slightly raised grain. Remove the doors from the cabinets and lay them on the floor. The plain-looking kitchen was reborn with a more stylish Craftsman appearance. Hello. I am happy to advice on suitable products to complete the project if you let me know what type of finish you want. How to repair this could depend on the wood and the previous treatment that is on the wood. The wood grain stood out even more after the finish coats were applied. So, measure your drawer thickness, then pick up some 1-1/4 or 1-1/2 in. I hope that helps and if you have any further questions please do not hesitate to get in touch. A small drop of mild washing up liquid is often enough to get rid of build-ups. I have another query, now that I am in the middle of the task of renovating my kitchen worktops. Or maybe you can develop your own groove pattern. If so, wed love to hear about it. Can you please help with this although they are good work tops may have to change them if we cant get oiling right. I replaced the old hinges on these cabinets with new self-closing ones. We would like to be able to determine the surface finish type of our kitchen cupboards. For this method, we will cover how to restore oak cabinets using a chemical stripper and a stain to get them back to their original color. Here are the steps to restore your oak cabinets: While many homeowners may choose to restore their own oak cabinets, it's important to know that a certain level of skill and patience is necessary to complete this DIY project. Wooden kitchen units dont tend to respond well to harshdetergents, soap pads or steel wool, all of which can easily ruin the surface. deep. Feel free to email me at wood@finishes.direct with details and I can narrow down some suitable products for you. So a test area is the first step. I have wooden kitchen cabinets, so this will be of huge help! Continue reading to learn more about the steps involved in completing this project. What is the best method of cleaning this up and regaining the dark wood colour..and maintaining it. I have noticed it is already started to get a bit scuffed. This article will tell you how to perform this cosmetic kitchen surgery in 30 minutes per door or drawer. If you do have any more questions, please feel free to contact us or send an email to wood@finishes.direct with any questions about products or application. Match color from hardware, countertops or appliances. Antique Painted Cabinets: Tips and Techniques to Try at Home, 4 Proven Methods for Creating Wood Joints, Do Not Sell My Personal Information CA Residents. What I have done so far, looks great, but I noticed this morning, that there is the odd rough patch on the wood, Is it too late to lightly sand these areas, having completed the oiling? If you accidentally lighten an area too much, apply a matching gel stain to the spot and let it dry before proceeding. Would you recommend this or something else? Varnished finishes can be difficult to patch repair, especially when they are quite old, and my best advice I am afraid will be to sand back to bare wood and start again. With Kind Regards, Fred, Sounds like you may have to sand back to remove the grey. If you have been using White Spirit to wipe the surface, its likely that any wood oil or wax that was on the wood has been partially or fully removed. Do you think this is water damage and can it be rectified with sanding and re-oiling? Start on the cabinets and run your sandpaper block or orbital sander on the sides of the cabinets. I chose 1-1/4-in. A mild detergent will cut through the grease and reveal the underlying wood without causing damage. It's worth noting that you can also restore the cabinets without using a stripper and you can opt for painting them as opposed to applying a stain. And you're all set! You can email at wood@finishes.direct. But generally speaking one oil will go over another with out any problems. My question is would it be possible to lightly sand the infill pieces and stain them and refinish the with a lacquer of the same sheen as the original kitchen if so what would the lacquer be as the kitchen is a sort of semi gloss. For most light spots and scratches, Old English furniture polish tends to be a well-received stain remover. They require some special tools and are harder to install than face-mounted hinges, but theyre a good option if you want a higher-quality, adjustable hinge. My main question is, I am going to use Paint Panther varnish remover to get back to what I hope will be the natural wood an then seal with the Manns Top Oil as you recommend. Wonderful tips! And if you have only applied one coat of the Osmo then chances are the wood will absorb another coat of an oil. Any help appreciated. You're almost at the home stretch. It will not remove the stains in the wood, it may be that you will have to sand these out. My dog has been jumping up to look out of the window and I have alot of scratches on them what can I do. If your kitchen is anything like most peoples itll bea busy, bustlingplace full of action and fun,food preparation,pets and children. Obviously, I am not saying anything, but am going to try and sort the problem myself. Hello It will depend on the extent of the damage but I can recommend the Barrettine Mould and Mildew Cleaner which is good for this kind of problem, stubborn stains and blackening may require additional sanding. As a general rule, varnished surfaces are more durable and can withstand more in the way of household cleaning products. I have pine worktops in my kitchen, which had become badly worn. If you are able to get the woods original colour back then I can make some recommendations on how to further protect it, I would need to know what is currently on there and what type of wood you are treating. And if you have any further questions please do not hesitate to get in touch. If this does not work then you may need to lightly sand the area to remove the rough feel and then re oil. Heres a list. Thank you. Once you have removed the stripping from the cabinets, start the same process on the cabinet doors. worktop FAQ page that answers many of the most common questions and issues. We stock an impressive and varied choice of topquality kitchen cabinet finishes. This type of door makes using a completely concealed hinge problematic, if not impossible. Use two heavy-duty spring clamps to hold the jig in place. If you have any further questions or would like advice on the correct product just let me know Sam. I have a very busy household with three toddlers so need something that will hold up I am hoping to strip it back to be able to whiten the surface before oiling. It will require cleaning with a cleaner that is not to corrosive, so PH neutral, and this may be another issue that is having an impact on the oil. The most important thing to remember when painting over oak cabinets is that they will most likely need to be sanded and primed before you can apply the paint. This is a protective oil that is designed to leave the wood looking and feeling as natural as possible. It is easy to apply, only requiring two thin coats of oil and then to maintain just give a top up coat when you feel the wood needs it. Wipe over with a damp cloth (never with large amounts of water), then dry the surfaces immediately. If you have any further question please let me know, and my apologies for the delay in getting back to you. A couple of drops on the surface of the wood left for around and hour, if the oil remains unmoved then you have a seal like varnish on the surface. Keep a damp rag at hand to wipe away mistakes. Hi I have an old but excellent condition kitchen, I want to rehash it with 2 new units that will give me extra storage space. I take care for the rest of the house but I know that the kitchen is the busiest area and I am happy that I am not responsible for the clutter there. See our The doors you see here, very common on older standard cabinets, have a 3/8-in. If there is anything further that I can help with please do let me know. Most sink cabinets have a false front drawer above the doors. What is the best thing to do? It has discoloured and gone rough. Not sure how to tell if its been varnished or oiled, but I need to get rid of the stickiness. . If you need to discuss further or would like more advice please do feel free to give us a call and speak to one of our friendly advisers or email us on wood@finishes.direct. Yes, you can paint over oak cabinets. This can be annually or longer depending on how much the surface gets used, but simply clean the surface by wiping with White Spirit and then re-oil. Another benefit is that your kitchen wont be out of commission while you work. You should find that this will remove a lot of dirt and grease. Have you discovered the easiest way to banish the grease and maintain a beautiful wood finish? Knowing if your kitchen cupboards, cabinets and worktops are oiled or varnished is fairly important as the way they are cleaned and maintained can be very different. wide (paint stirrer sticks work well) screwed to the sides of the block. But other times it will be held with glued cleats, and youll have to use a chisel and a hammer to knock these cleats off, but the front will come out. Clean the brushes with denatured alcohol. What Color Wood Floor With Dark Cabinets? It is likely to be water damage yes. Anyone who has had to clean the kitchen of a house previously occupied by students will know how difficult it can be to remove the grease that builds up when a kitchen is not routinely cleaned. We have some very helpful videos on our YouTube Videos with hints and tips on preparation and application. Next, take a mildly damp rag and run it over the cabinet doors as well as the interior to remove any dust or debris that may have accumulated on the surface of the cabinets--the less grime that you have to scrape away during the stripping process, the better. rabbeted inset with a 3/8-in. I am currently fitting a new beech block wood worktop and have given it two coats of Manns top oil as in your video. Hello, I have wooden work surface and its extremely sticky. Sand lightly between coats. I have tried Vaseline and coconut oil to take the white off. I have mahogany worktoos that have become dull and stained. Its also possible that youll have a pair of doors without a center stile. You have entered an incorrect email address! Next, wipe the area again with a dry cloth to remove the soap. Is it possible to patch repair a kitchen cupboard door If so, what are the best products for this please? This will remove all or most of it and then a light sand to prepare the wood for a new product. Run your bare hand over the cabinets and doors to ensure that the surfaces are smooth before continuing further--you shouldn't feel any grooves or bumps in the grain. It is very important to keep the counter tops clean and tidy. After filling the holes, spot-finish the putty with shellac (water-based polyurethane wont stick to the putty). You can certainly sand back to bare wood if you would like. I have pine wooden work tops we have sanded them down and then cleaned with mentholated spirits and white spirit we have oiled them but when we wipe off the excess oil it leaves streaky lines and patchy. Also can you tell me if there is any treatment on the worktops or are they bare wood? Because these doors originally had face-mounted hinges on 3/8-in. We have wooden worktops that have been waxed with Osmo oil, these are showing signs of wear and the surface is starting to bubble. I have a ten year old below-sink commercially sealed (Howdens Tewksbury) solid oak door that has developed grey streaks that look as if water has seeped into the lower joints, and along the wood grain below the clear sealed finish. Disclosure: We may get commissions for purchases made through links in this post. Finally, flip the mounting lip down and locate your holes. The kitchen at my home is the most important room. On these doors, I noticed a dramatic difference simply after cleaning off 35 years of kitchen grease, grime and broken-down finishthis cleaning made the wood grain reappear after years in hiding. However, the birch plywood doors on these cabinets have a very subtle grain pattern, unlike oak or ash, so I decided they needed more drama and added the painted grooves for contrast. Its important to protect your kitchen worktops from the effects of moisture so you need to make certain that your wood surfaces are well protected with a wood oil or varnish so that moisture cannot penetrate into the timber. The varnish has obviously been applied on to the top without sanding as there are several stains that look like water marks under the varnish. I have just had oak worktops fitted. Now it's time to apply a final finish to the cabinets to help protect them from scratches, dents, and water stains. The bit should be set to keep you from drilling through the door face. The doors look like they have a light varnish on them as protection, but there is a patch of greyer looking wood on the corner of the freezer door where the sheen (I assume varnish) has worn. If you have oiled cupboards then simply sanding back the effected areas and re oiling is the answer. Elbow grease is an effective remedy for kitchen grease! I assume I will need to sand the island surface again do I need to use white spirit on it prior to sanding? In the meantime, why not take a look at these? The oil I used lasted no time at all. Many thanks. And do it as often as you can, otherwisethe grease and steam thatsso typical inkitchens will do its best to glue anydust and grease fast onto your surfaces, making cleaning moreof a challenge as time goes by and the muck builds up. If you need advice, why not The oil needs to be applied very thinly so that it can penetrate the surface of the wood. Thanks a lot for sharing this information here because you helped me a lot! Always sand in the direction of the grain and for oil application finish with a 150 180 grit. To match the color exactly, mix two or more shades of oil-based wood putty. I was going to sand the stains out.. could anyone advise what to use Unfortunately, the kitchen now smells of the finishing oil vapour even a week after it was applied. my husband has used sugar soap to clean kitchen walls. By the DIY experts of The Family Handyman Magazine. If you do find that you need a stripper to help then I would recommend the Paint Panther Paint and Varnish Remover as a quick and effective treatment. It doesnt seem to be working, any other ideas? Start with the sides of the cabinets and scrape down from top to bottom (in straight lines) until all of the chemical stripper is removed. Hi Sam In this post, we will discuss how to restore your oak cabinets and bring them back to life. A small inconspicuous area to check that you like the colour that will be achieved and that there are not adverse reactions between the two products. The sugar soap has dripped all over my oak worktops. Sometimes it will be held in place with wooden cleats that are easily turned. If you would like further advice please feel free to get in touch with me via our contact us page. It didnt have a varnished finish. Its a difficult one as the marks are over head, if it is varnish on the cupboards, often people can use a medium heat iron and place a tea towel of the effected area and gently iron, this often removes white stains from heat damage such as yours. They also let you toss all those old door catches that get in the way when you use your cabinets. It is durable and hard wearing and will be easy to repair and maintain overtime. If your cabinets are already painted, a latex primer should work well. Always try a test area first and this is available in sample sizes. The Osmo Top Oil is a recommended product for worktops and is an effective liquid repellent. Cover any existing furniture and be sure to wear gloves, a dust mask, and goggles to keep from breathing in the harmful fumes from the chemicals that you'll be working with. Next, go over the top and bottom of the cabinet with the stain. Have the necessary tools for this DIY project lined up before you startyoull save time and frustration. If all goes well with the test then full application can be done. Can You Use A Bissell Crosswave On Vinyl Or Laminate Flooring? If it does, use a proper surface cleaner suitable for varnished surfaces. Will the stripper remove the stains as well? Youll have to remove this piece to rout the grooves. To solve it, dont cut vertical grooves on the sides of the drawer faces above the spot where the doors meet. Heres How to Maintain Them, Odd, Weird and Wonderful Wood Finishes News, Beautiful White Wood Finishes for Dreamy Interiors, Wooden Flooring Types, Finishes and Maintenance Debunked, Bring Colour to Your Home with A Rainbow of Wood Stain Colours, How To Paint Your Garden Fence For A Smooth Finish. Attach the self-closing hinges to the doors. For a full range of cleaning, maintenance and renovation products, see our Its best to go for a proper wood surface cleaner and to avoid harsh supermarket cleaning products as these may mark, stain or strip away oiled surfaces. Two coats should be sufficient as the wood is unlikely to accept any more. Thank you Test areas are always recommended. Cabinets and drawers are constantly being opened and closed as you and the rest of your household go about your day. Use the wax-free type, or make sure the final topcoat that you use is compatible with regular shellac. With any luck it has not penetrated too deep into the wood. After the finish has set, reassemble the cabinets, place the doors back on, and re-attach any fixtures that were removed. Your doors may not need that extra help. Is there any kind of liquid remover that we could use? Today I sanded the surface down and applied 2 coats of Ronseal interior varnish the smell is less but it is still there. Make it from a 6 x 6 x 3/4-in. This needs to be applied before the worktop oil however and gives the wood some extra protection from moisture and heat. I googled it and it says to use bees wax, will that work?